pull the radiator cap and drive a ford underneath it......new truck...errr different truck and you will be all set
Oh this is not add a line thread
What do you do to your truck today?
- Thread starter josmoloco
- Start date
.....new truck...errr different truck and you will be all set
Oh this is not add a line thread
I cant wait to sell it and get a new truck!
Ford...possible...but not likely.
Made some tube doors
This might interest me! Got any pictures of your rig?
Ford.
It'll take a lot out of me.Hmm. Here's my truck working day.
Got my buddy to come up to hang and work on the truck. We went out to the Willie's garage, and he sent us down to his friend's junkyard to get our part. They were closed, so we went down the mountain and into town to a big ole yard (not in my truck this time...too illegal, so we took his lifted 04 f150). On the way, we stopped at the country store and picked up a few bolts for the bellhousing cover. Seen some hot girls there, but we got rejected hard...might have to had been cause my camo swimtrunks and 12inch slip on work boots...
Well, turns out this yard crushes most cars under 1990, but we did catch an old k30 before it was getting put in the crusher. The only part it had that I needed was the hazard button. We checked the whole yard for anything with a 350 that would have a fan blade...and not one. 
The junk man gave me the part for free. We stopped at Auto Zone to ask about any other yards nearby. He gave me directions, but it all went right through me. We got about half way, until I completely forgot what he said. We ended up lost. After a bunch of driving in town, I called up mama. 
She got me to the lake and back in my country, so we got home about an hour later. Nothing like flying down back country roads in a truck. 
We got home and pulled the bellhousing cover off, then found out the cover we got, aint the right one! So screw the cover, I just threw the old one back on. It aint too important anyways.
Progress: Hazard button...
Oh well, atleast I didn't get negative progress again!!
Got my buddy to come up to hang and work on the truck. We went out to the Willie's garage, and he sent us down to his friend's junkyard to get our part. They were closed, so we went down the mountain and into town to a big ole yard (not in my truck this time...too illegal, so we took his lifted 04 f150). On the way, we stopped at the country store and picked up a few bolts for the bellhousing cover. Seen some hot girls there, but we got rejected hard...might have to had been cause my camo swimtrunks and 12inch slip on work boots...
Well, turns out this yard crushes most cars under 1990, but we did catch an old k30 before it was getting put in the crusher. The only part it had that I needed was the hazard button. We checked the whole yard for anything with a 350 that would have a fan blade...and not one. The junk man gave me the part for free. We stopped at Auto Zone to ask about any other yards nearby. He gave me directions, but it all went right through me. We got about half way, until I completely forgot what he said. We ended up lost. After a bunch of driving in town, I called up mama. She got me to the lake and back in my country, so we got home about an hour later. Nothing like flying down back country roads in a truck. We got home and pulled the bellhousing cover off, then found out the cover we got, aint the right one! So screw the cover, I just threw the old one back on. It aint too important anyways.Progress: Hazard button...
Oh well, atleast I didn't get negative progress again!!
only pics I have with the doors on, no close ups of the doors (product isn't finished)This might interest me! Got any pictures of your rig?
They aren't done yet, if you look closely at the bottom corners (aft....towards the rear) you will see a nice sized gap that still needs to be elbowed. Hopefully I will have enough time this weekend to finish them up.
When I get them finished, I will update my build thread with more details on them.
only pics I have with the doors on, no close ups of the doors (product isn't finished)
I was interested...until I seen it was a Toyota.
Great looking truck! And nice wheelin' there!You must drive a Heep
Thanks. Its a work in progress!
No way! 79' Chevy K10. But...I'll be posting in this thread a lot, so that says something.good to see I'm not the only one with an IFS rigonly pics I have with the doors on, no close ups of the doors (product isn't finished)
They aren't done yet, if you look closely at the bottom corners (aft....towards the rear) you will see a nice sized gap that still needs to be elbowed. Hopefully I will have enough time this weekend to finish them up.
When I get them finished, I will update my build thread with more details on them.
good to see I'm not the only one with an IFS rig
You're not...My Chevy's IFS and so is my B-ronco....No Chevy pi'cs but my donkey's in here somewhere...just a pose, no action!
