I welded my pipe bracket and popped my dents out. Used expansion plugs and a air compressor with map gas to pop the dents out. Tigged my bracket in a 40 minute study hall during school. The shop is fucking you
yeah i did have one pop out on me. I made sure no one was around and i was out of the way of the ends of the pipe before i did anything thoughJust be careful when plugging and heating the pipe. them plugs can fire out like a cannon and the pipe can burst like a grenade. My buddy George will not repair pipes anymore because of almost getting knocked for a loop.
I run the universal ones on my YZ250's. Not a gimmick, they protect against rock blows on a get off by distributing the impact across the area. I found the easiest way to install it is to fit it to the bottom and clamp it, use a dead blow or mallet to bend it around the sides. (Best done on used/old pipe and off the bike.)
I run the universal ones on my YZ250's. Not a gimmick, they protect against rock blows on a get off by distributing the impact across the area. I found the easiest way to install it is to fit it to the bottom and clamp it, use a dead blow or mallet to bend it around the sides. (Best done on used/old pipe and off the bike.)