Hey guys, I'm new to two strokes (and dirtbikes) and I don't have a manual yet, I've already got the oil, can someone tell me how to change my oil? Also, what filter I need? It's an 03 YZ 250
No worries. For future reference that section is reserved for write-ups, not questions. Also if you're not sure where something goes in the future, just put it in the General Dirt Bike section and a mod will move it if needed.Sorry, my bad.
?This is not engine oil, and is only for your gears and clutch.
i/e no filter, small capacity.
Did I not mention the .85 US Qts in my above mentioned high tech help?i/e no filter, small capacity.
Thanks man! I appreciate it!No oil filter, warm up engine to get oil hot, turn off motor, place oil pan under bike, remove bolt from bottom of motor, remove oil filler cap and let drain. When drained, replace bolt (preferably adding a new copper washer), fill up trans (roughly .85 US QTs), put filler cap back on, start bike and check for leaks, Ride Hard
This is not engine oil, and is only for your gears and clutch.