Ride Engineering Clamps

PSJBrock

PSJBrock

We have a couple sets of the "limited Edition" blue triple clamps in stock from ride engineering. These are 21.5mm offset for the 2013 KXF 250 and 450. These are the most common aftermarket offset they sell for this bike. I just talked to the guys at Ride Engineering at length about these clamps and they informed me that this is what the Hare and Hound guys run and their motocross guys run these as well.

http://www.powersportjunkie.com/rid...f-kx250f-triple-clamps-p/kx-tbk20-m3-blue.htm

These are for the 06-12

http://www.powersportjunkie.com/rid...x250f-triple-clamps-p/re-kx-tbk20-mb-blue.htm
 
James

James

Staff member
PSJBrock:
We have a couple sets of the "limited Edition" blue triple clamps in stock from ride engineering. These are 21.5mm offset for the 2013 KXF 250 and 450. These are the most common aftermarket offset they sell for this bike. I just talked to the guys at Ride Engineering at length about these clamps and they informed me that this is what the Hare and Hound guys run and their motocross guys run these as well.

http://www.powersportjunkie.com/rid...f-kx250f-triple-clamps-p/kx-tbk20-m3-blue.htm

These are for the 06-12

http://www.powersportjunkie.com/rid...x250f-triple-clamps-p/re-kx-tbk20-mb-blue.htm
Click to expand...
The MX guys prefer the 21.5 over the 20?
 
T

TurtleShifter

PSJBrock:
Only thing they have is the 22MM clamps for the YZ that fit the WR
Click to expand...
So the YZ part and the WR part are interchangeable? No issue with the ODO I guess? How much for them in black?

Oh, and I have the Scotts under bar damper so I have the BRP clamps which just bolted onto the stock upper triple. That should bolt onto this upper triple, correct?
 
PSJBrock

PSJBrock

TurtleShifter:
So the YZ part and the WR part are interchangeable? No issue with the ODO I guess? How much for them in black?

Oh, and I have the Scotts under bar damper so I have the BRP clamps which just bolted onto the stock upper triple. That should bolt onto this upper triple, correct?
Click to expand...

Your scotts should bolt right up but you are probably going to have to make something to mount your OFO to the clamps. There wont be anything to mount it on the clamps.

The WR and YZ have the same frame in the neck area the WR just uses a different offset for the triple clamps.
 
T

TurtleShifter

PSJBrock:
Your scotts should bolt right up but you are probably going to have to make something to mount your OFO to the clamps. There wont be anything to mount it on the clamps.

The WR and YZ have the same frame in the neck area the WR just uses a different offset for the triple clamps.
Click to expand...
No problem with ODO mount. What offset are these? Can you give pricing or should that be handled offline?
 
Top