ok so i got a Kawasaki kx250 yr2000 and everytime i start it it bogs out then dies and doesnt start.
ive been through 4 plugs in 4-5 rides.i have changed ratio of gas and oil from 32:1,40:1,50:1 and ive always ran at 50:1 and had no problems like this in the past.im using BR9EIX iranium spark plugs(ive always used these)
so i put a new plug in and started it and rode for a day next day start it ,warm it up and take off and when im giving it throttle it bogs and dies,took it back home cleaned the plug started then died, so now im looking around my bike and i see that there is black liquid leaking from exhaust pipe, checked to see if there were any debris in it and nothing ,so looked at the carburetors rubber things that connect to motor and there is little cracks not deep cracks but there is quite alot of them,ive cleaned my carb,the jets inside and cleaned my air filter made sure there was not alot of oil on filter so it can get air,and i just looked at the power valve and i see alot of black oil idk if thats suppose to be there or what......
and before all of this i have put new piston rings and gaskets
can anyone help me out???
Thank You
ive been through 4 plugs in 4-5 rides.i have changed ratio of gas and oil from 32:1,40:1,50:1 and ive always ran at 50:1 and had no problems like this in the past.im using BR9EIX iranium spark plugs(ive always used these)
so i put a new plug in and started it and rode for a day next day start it ,warm it up and take off and when im giving it throttle it bogs and dies,took it back home cleaned the plug started then died, so now im looking around my bike and i see that there is black liquid leaking from exhaust pipe, checked to see if there were any debris in it and nothing ,so looked at the carburetors rubber things that connect to motor and there is little cracks not deep cracks but there is quite alot of them,ive cleaned my carb,the jets inside and cleaned my air filter made sure there was not alot of oil on filter so it can get air,and i just looked at the power valve and i see alot of black oil idk if thats suppose to be there or what......
and before all of this i have put new piston rings and gaskets
can anyone help me out???
Thank You