2 Stroke I need help

[bobkyle2]

If its not idling.. It needs carb cleaned or idle set.....

Have you done a compression check/checked reeds.

 

[justincr250]

If its not idling.. It needs carb cleaned or idle set.....

Have you done a compression check/checked reeds.

carb is spotless so I need to check the reeds and compression

 

[Nighthawk016]

carb is spotless so I need to check the reeds and compression

Whats stock jetting? whats the jetting at currently? and what premix ratio are you running?

 

[Jhutchh]

I think it just needs a gnarly

 

[justincr250]

Whats stock jetting? whats the jetting at currently? and what premix ratio are you running?

I'm not sure about stock jetting it has a full pro circuit exhaust so it's jetted for it 400 main jet 32.5 pilot jet 12-82 needle on second position and we have to put fresh gas in it he just bought it and don't know what mix it has the guy said he thinks 36:1 but procircuit says use 32:1

 

[Nighthawk016]

I'm not sure about stock jetting it has a full pro circuit exhaust so it's jetted for it 400 main jet 32.5 pilot jet 12-82 needle on second position and we have to put fresh gas in it he just bought it and don't know what mix it has the guy said he thinks 36:1 but procircuit says use 32:1

mix up your own 32:1, make sure the small adjustment screw on the bottom and back of the carb is 1.5-2 turns out.
The screw you are looking for should be in this general area and look like this: