450F "I drink your Milkshake!" (finished!)-- CRF450X do-over special

Well, the suspension was fantastic. The Motor was pretty good, but the jetting is way off.

Need to go from a 170 to a 178 main.
Need to change from a JD Red needle to a NCVS on the 4th clip.
Need to change from a 48 pilot to a 45
Need to replace the slide plate seal
Need to adjust the apump linkage: seems like the squirt is hitting the slide now....
 
Well, the suspension was fantastic. The Motor was pretty good, but the jetting is way off.

Need to go from a 170 to a 178 main.
Need to change from a JD Red needle to a NCVS on the 4th clip.
Need to change from a 48 pilot to a 45
Need to replace the slide plate seal
Need to adjust the apump linkage: seems like the squirt is hitting the slide now....

:shocked: ... huh???
 
Huh what?

There is major WOT hesitation. The leak jet is correct (50), so either the nozzle is clogged, or the pump timing is off (hitting the slide)

I was taking that one a different direction .. thanks for the correction ... OR I was right and you need to see a doctor quick!
 
OK, pulled the subframe up, whacked the throttle, and.............no a-pump squirt! So that's good, because I know what to do now. I'll also change my needle and pilot while I'm in there. It's been too rich for too long.
 
Top