250F 2014 yz250f has what!? Fuel injection?

As did the others. However what sets the others apart is that they've also had a couple years of real world testing by now (and learned from it). The perfect example of that is the upstream (air box/boot) jet that Kawi put in to address some power issues.

In short, I wouldn't run a first year EFI bike.

Generally true, but yamaha has been running EFI in their wr250r's since 08 and yz450's since 09 And in their street bikes from even before that. And I can't imagine they would stray from a way different design then what has already proven itself for them, heck I wouldnt be surprised if they used the same fuel pump setup. So to the OP I wouldn't be to concerned about the EFI reliability.
 
YZ450f_INSIDE1.jpg

As expected, the YZ250F gets long overdue motor update.
The YZ250F was the last of the carburetor holdouts, so it comes as no surprise that the 2014 YZ250F gets FI for the first time. But there’s more. It also gets an all-new “reversed” motor (cylinder), a layout we first saw on the YZ450F when it was revealed in 2009 for the 2010 model year. Four years later, the smaller YZ250F gets the same type treatment. You knew it was coming, but maybe a little earlier. Oh well, that’s history now.
The YZ250 was already known for its solid handling, excellent suspension and outstanding durability, but the YZ’s motor was getting a little long in the tooth and was in dire need of a makeover, and it certainly got it.
Yamaha’s development target with the new YZ250F was to improve mid to high rpm performance without losing bottom-end torque feeling. To do this, Yamaha started from scratch and designed a completely new motor. Internally, pretty much everything is new. It has a new four-valve cylinder head that uses a straight-port downdraft design. It has new intake and exhaust valves, camshafts, piston, transmission ratios, clutch and wet sump design. Yamaha claims the new YZ250F has more midrange and top-end power, more over-rev power, smoother shifting and overall improved controllability. And the new 12-hole fuel injector provides more consistent throttle response.
YZ450f_2gallerymotor.jpg

Like the YZ450F, the new 250 gets the reverse cylinder configuration with the intake in the front and the exhaust in the back. Yamaha designed it to have more mid-to-top power without sacrificing torque.
As seen on the YZ450F factory motocross race bikes, the YZ250F is fitted with a wrap-around exhaust system, which enables the silencer to be mounted a whopping 7.5 inches closer to the center of the bike. The overall design of the exhaust system better centralizes mass weight resulting in a lighter feel on the track.
Although the frame is new, its dimensions are still similar to the previous frame, which was already considered one of the best in the business. It was so good, that the all-new WR450F, which came out in 2012, was fitted with the same frame. The 2014 chassis has new engine brackets, new rubber-mounted bar mounts, and allows for a new center positioning for the fuel tank, which has more capacity at 2.0 gallons (formerly 1.6 gallons). The thickness of the frame’s main rails is different for what Yamaha translates into improved rigidity balance.
YZ250f_4galleryframe.jpg

Despite the reversed cylinder, Yamaha didn’t mess much with frame dimensions. The YZ250F was already a solid-handling bike.
No air forks for the Yamaha. Instead, they stuck with its highly praised Speed Sensitive System KYB forks, but it does have a new surface finish for the inner tubes, and the outer tubes have been modified for different rigidity.
To accommodate the new fuel tank and exhaust system, the shock’s reservoir is mounted vertically instead of horizontally.
Speaking of the fuel tank, missing is the fuel cap. Well, it’s not really missing but it’s now hidden under the seat, making for a flat and uninterrupted layout along the top of the seat and the wrap-around radiator shrouds. The fuel cap is located in the same general area but underneath the front part of the seat. For tool-less access, you remove a small portion of the seat, revealing the cap. The small part of the seat that you just remove is tethered to the bike so you can’t lose it and snaps back into place. This design adds one more step to the refueling process, so off-roaders might not like it, but Yamaha designed this bike with motocross in mind and will remind you about their WR line.
On the flip side, however, Yamaha made access to the air filter easier. It’s now a two-step process instead of four.
As before, the YZ250F will be available in two color choices – Yamaha Race Team Blue/White, and White/Red. The white version also has black rims and a gold chain.
Yamaha’s accessory GYTR Power Tuner is compatible with the YZ250F.
Yamaha announced an MSRP of $7490 but the bike won’t be available until October.
YZ450f_8galleryaction.jpg

The MSRP of the 2014 YZ240F is $200 more than the ’13 YZ.
SPECIFICATIONS
2014 Yamaha YZ250F
ENGINE TYPE: Liquid-Cooled, DOHC, 4-Valve, 4-Stroke
DISPLACEMENT: 249cc
BORE X STROKE: 77.0 x 53.6mm
COMPRESSION RATIO: 13.5:1
FUEL DELIVERY: Yamaha Fuel-Injection (YFI), Keihin 44mm
IGNITION: TCI
TRANSMISSION: Constant-mesh 5-speed, wet multi-plate clutch
FRONT SUSPENSION: KYB Speed-Sensitive System, inverted fork, fully adjustable
REAR SUSPENSION: KYB single shock, fully adjustable
FRONT WHEEL TRAVEL: 12.2 in.
REAR WHEEL TRAVEL: 12.4 in.
FRONT BRAKE: Hydraulic single disc, 250mm
REAR BRAKE: Hydraulic single disc, 245mm
FRONT TIRE: 80/100-21 Bridgestone M404-A
REAR TIRE: 100/90-19 Bridgestone M403
SEAT HEIGHT: 38.0 in.
WHEELBASE: 58.1 in.
GROUND CLEARANCE: 12.8 in.
FUEL CAPACITY: 2.1 gal.
WET WEIGHT: 231 lbs.
COLOR: Team Yamaha Blue/White; White/Red
 
Top