250 1988 yz250 build

Redordead89 · Dec 23, 2015

PALMER84ONE:
WWW is your friend.

It sure is, I managed to go over 2 years in to my 89 build before I bought the manual for it!
Just bought it when I was about to start reassembly with 2 years of collecting everything required by online fische
And yes before you all say it that was probably a contributing factor to the 2 na half year build :picard:

Lovespeed · Dec 23, 2015

ossagp:
Are you printing them out and using them in the bird cage?

I don't see the point in spending money to buy a manual when I have the entire one saved on my phone whenever I want

Redordead89 · Dec 23, 2015

However!

From

With a bit of,
Www.BikePics.com/members/redordead/89cr250 in between will give you an idea of how silly it can get so do as much as you can with online help here and everywhere www. And always remember your ABC's ( Always Be Checking! Check and measure twice do the job once! :prof:

Mihylo33 · Dec 23, 2015

Motor needs to be done. Crank rebuild and a topend. Send the cylinder out for a replating
Www.wiseco.com for cranks and stuff.

Lovespeed · Dec 23, 2015

Redordead89:
However!
View attachment 28005
FromView attachment 28006
With a bit of,
Www.BikePics.com/members/redordead/89cr250 in between will give you an idea of how silly it can get so do as much as you can with online help here and everywhere www. And always remember your ABC's ( Always Be Checking! Check and measure twice do the job once!

Looks great! Can't wait to get mine together!!

Lovespeed · Dec 23, 2015

Mihylo33:
Motor needs to be done. Crank rebuild and a topend. Send the cylinder out for a replating
Www.wiseco.com for cranks and stuff.

I bought a lot of new parts. new rod, bearings, piston, gaskets, rings, few other small stuff

Redordead89 · Dec 23, 2015

Fkn storm in Scotland tonight, out on decking coz I smoke and rain is being a pita on iPad
:thumbsdown:

Redordead89 · Dec 23, 2015

Lovespeed:
Who are both of them? Haha

Well, Dennis was a :chicken:

And who knows about Ludwig? :noidea:

ossagp · Dec 23, 2015

Speed isn't so different than others. They find the figure in the manual of what they want and tear into it. Leaving out instructions. I see a lot of people who could skip about 5 years of "clumsy" attempts.

Redordead89 · Dec 23, 2015

Just before I go @3am, I was almost as green as you when I started my 89! :pothead:

Lovespeed · Dec 23, 2015

ossagp:
Speed isn't so different than others. They find the figure in the manual of what they want and tear into it. Leaving out instructions. I see a lot of people who could skip about 5 years of "clumsy" attempts.

How do you know anything that I'm doing? How about you stop commenting on my thread from now on since you all you do is talk a lot of crap about what I'm doing. You don't know anything about what I'm doing or what I've done. Just because it's my first rebuild doesn't mean I'm tearing it up. Give me advice, and don't be a dick about it. If you can't do that then don't comment at all.

ossagp · Dec 23, 2015

Lovespeed:
I don't see the point in spending money to buy a manual when I have the entire one saved on my phone whenever I want

Oh I don't either. I was just curious.

PALMER84ONE · Dec 23, 2015

Redordead89:
Well, Dennis was a And who knows about Ludwig?

You didn't get in on the kid with the YZ 125 that had stiff linkage, top end noise, cable stuck, and many other things? I need to find that thread... Andy @ossagp will remember him. Maybe I don't have his on-line right.

lgwillie Got it....

ossagp · Dec 24, 2015

Oh yeah.....

Redordead89 · Dec 24, 2015