Sorry was getting frustrated is all.
What I have learned since putting this HPP system together 300 times, is after everything is together and governor is engaged, the valves will either;
1) Move in and out easily with little force. Though I cannot get them to seat correctly.
2) Move in and out with a lot of force applied to valves, maybe 6ft/lbs or so (guesstimate). They do seat firmly.
3) Valves have a bind somewhere and will not move, even with force.
With the rebuild I set them up to the #2 configuration. That wasn't working. I suppose I'll try #1 next. I don't have much hope for #3.