Sticking Throttle

T

tylerdb

Found the problem I think.
The drain bolt on the carb was tightened too much which caused metal shavings off of it to break off and get into the carb. These would have clogged the main jet not allowing the needle to fully close
 
josmoloco

josmoloco

tylerdb:
Found the problem I think.
The drain bolt on the carb was tightened too much which caused metal shavings off of it to break off and get into the carb. These would have clogged the main jet not allowing the needle to fully close
Click to expand...

That bike is a breeze to pull the carb out and check for that junk
 
Top