Body How to make frame guards/grips from 3M safety walk.

Hi guys... After I installed the flywheel weight I used the remnants of the plastic packaging to make a template. Traced it out on the back of the 3M safety walk material and cut it out. Cleaned the area with acetone and applied the material. Here are some pics.
8486ded52495b7c4c6b63622ace744ca.jpg


b0c8cd42cb4aedd166b9fbac092eae13.jpg

b7f8437407dd54fe52524ca26eb647ed.jpg

d9eb7f3a533f1ce83af7ef168e1c8dea.jpg

67f6cace7be3b5036e7785c59e0f71da.jpg

d7aade57058f42777a8c3b7ed7f4c2f7.jpg

0deb440ed29b0648eacf0e7eec25c015.jpg
 
Top