Other Dirtbike wont start making weird noises?

So? any news???

Nope... Was i supposed to notify yall i didnt know haha
Im busy and waiting for help from a friend

Nah, just drop off the edge of the earth.

Senor, the first things I would do is to remove the sparkplug and check for damage and to see if there is any sign of melted metal on it. From there I would go to the cover over the valves (plainly seen on the pics that Dan posted) and remove that cover an inspect for broken valve stems. From there I would remove the lower cover and set the rotor on the mark "t" with the mark on the case. If both of the valves do not appear to be fully extended then rotate the rotor 360 degrees (full circle) back to the same timing marks and check again. If you have excessive clearance of say 2mm or you cannot get valve clearance by resetting the screw adjusters on the rocker arms then you probably have valve damage. If all of this is too confusing, which I am guessing it is, you are going to need to read the manual and if you have an experienced friend you will get through this faster. We all started where you are starting :-)

So! Any news??? :noidea::pothead::forman::hifive::smirk:
 
Top