Great idea putting this up here. I have one word of caution on the "CHEAP" bolt kits. My son went this route on a sprocket bolt set a few years back and I just lost a lot of skin and blood trying to remove them when changing his sprocket out the other day. The material is soft and the bolts round, then the Allen heads were not deep enough and stripped out allowing me to slip off and drive my knuckles into the nice sharp teeth of the sprocket...Just Saying.Parts and Acessories
ASI aliuminum radiators- $180 (Ebay)
Harbor Freight stand- $30 Harbor Freight
Harbor Freight Lift Pedal Stand- $30 (Harbor Freight)
Topar Racing Billet Parts (made in the USA... they also have ignition covers that look trick for cheaper than a Boyesen one) (Topar Racing)
Tools
Eastwood Brake Gray Paint (perfect match for bare cast metal look)- $20 (Eastwood)
Harbor Freight 1/2" Drive Torque Wrench- $25 (Harbor Freight)
Jegs CHEAP Metric Bolt Kit (Note: not all metal machine screws)- $10 (Jegs Racing)
Jegs Metric O-ring Kit- $13 (Jegs Racing)
Not sure I am reading this sentence correctly.. read the fine print under the hubs. "Will not work with stock spokes and rim. Only works with G-force spokes and rim." Not sure if you are getting a big cost saving there.If you want/need new hubs you can use the G-Force hubs and spokes so you could have NEW HUBS FOR LESS THAN THE PRICE OF WHAT TWO USUALLY ARE!!!
Not sure I am reading this sentence correctly.. read the fine print under the hubs. "Will not work with stock spokes and rim. Only works with G-force spokes and rim." Not sure if you are getting a big cost saving there.