Hey Emily
Post up the link for her if you have it!
Anyone got a PW80 workshop manual on PDF
- Thread starter diggerdog36
- Start date
Post up the link for her if you have it!stator is 43 on the rotor. clutch center nut shows 35-37. my friend gene has these notes and has had three of these that his grandkids rode. there is still one at his place. they built one up to play race and they used a big bore piston that they came up with and made some piston pin adaptors to do so. it flew but was kind of impraticle, i mention it because his note shows that stock for the head nut is 7-8 (all these in foot pounds). he noted that they went up on torque a bit at a time and found the cases wouldnt hold the torque needed (18 plus) and that the stock settings wouldnt always hold pressure. They used a helicoil copy on the cases and it held fine. fyi if you are thinking along any of those lines.
Sorry for the delay, but it turns out I was correct. Searched "PW80 Service Manual" and clicked the very first link.https://www.dropbox.com/s/zobj3ivg9cc73g2/PW80.pdf
It was the first result on my google search. -BIG DAN
http://www.yamaha-motor.com/assets/service/manuals/2005/lit-11626-18-30_1089.pdf
Torques start on page 46
-BIG DAN