Reply to thread

Message

<blockquote data-quote="Nighthawk016" data-source="post: 91478" data-attributes="member: 334">its 1.5 turns out from seated, with the bog you are talking about (without a vid its hard to tell) it would seem to be the needle.&nbsp;to adjust the needle all you need to do is take the cap off the top of your carb. It could be a screw off cap, take the cap off and pull the throttle cable and slide out of the carb. Once its out pull the slide return out out of the slide and remove the plastic collar that holds the throttle cable in the slide, then remove the throttle cable and spring. Then you will need a 6mm socket to remove the needle retention bolt. After thats out, take note of the clip position on the needle, drop the clip 1 position on the needle, reassemble, and see of that makes the bog go away or makes it worse. Also, your needle should be N1EI on the 3rd clip for stock.&nbsp;Hope this helps somewhat <img src="https://www.dirtbikeaddicts.com/static/images/smilies/smile.gif"&nbsp; class="smilie" loading="lazy" alt=":)" title="Smile&nbsp; &nbsp; :)" data-shortname=":)" /></blockquote>

[QUOTE="Nighthawk016, post: 91478, member: 334"] its 1.5 turns out from seated, with the bog you are talking about (without a vid its hard to tell) it would seem to be the needle. to adjust the needle all you need to do is take the cap off the top of your carb. It could be a screw off cap, take the cap off and pull the throttle cable and slide out of the carb. Once its out pull the slide return out out of the slide and remove the plastic collar that holds the throttle cable in the slide, then remove the throttle cable and spring. Then you will need a 6mm socket to remove the needle retention bolt. After thats out, take note of the clip position on the needle, drop the clip 1 position on the needle, reassemble, and see of that makes the bog go away or makes it worse. Also, your needle should be N1EI on the 3rd clip for stock. Hope this helps somewhat :) [/QUOTE]

Verification