Forums
New posts
Search forums
Members
Current visitors
New profile posts
Search profile posts
What's new
New posts
New profile posts
Latest activity
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Everything Dirt Bike
Make / Model Specific
Honda
2003 CR 250 Electrical Issues ( No Spark ) I need some input
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="CampinCracker" data-source="post: 197752" data-attributes="member: 3535"><p>No problem about the schematic, a lot better than spending 125 on one. </p><p></p><p>An update to the thread, I found a local guy that had an 02 CR 250 that let me test my CDI in his bike. Well it fired right up! Good news and bad news. However the last thing I thought it could would be the stator and he had a new one for $100 so I bought it and put it in this morning. Still no spark. I then pulled my coil off and kind of rigged it up on my YZ just double check and it. The CR coil on the YZ put out a bright blue spark! I then pulled the wire harness off and checked continuity again between all wires and also made sure they didn't have continuity with wires they weren't supposed too, while I was doing this I was bending the harness in all different directions as well. I then checked all plugs and connectors everything is very clean and secure no loose wires or pins. There must be something I am missing. It is driving me crazy. So all in all my CDI is good, stator is good, coil is good, as far as I can tell all of the wiring is good. I however have not unbolted the motor to clean the grounds but the bike is super clean so I don't know if I should do that or not. WHAT AM I MISSING?!?! I'm so lost with this bike and I am usually very mechanically inclined! Anyways thanks for all of the help so far, this has been a great forum.</p></blockquote><p></p>
[QUOTE="CampinCracker, post: 197752, member: 3535"] No problem about the schematic, a lot better than spending 125 on one. An update to the thread, I found a local guy that had an 02 CR 250 that let me test my CDI in his bike. Well it fired right up! Good news and bad news. However the last thing I thought it could would be the stator and he had a new one for $100 so I bought it and put it in this morning. Still no spark. I then pulled my coil off and kind of rigged it up on my YZ just double check and it. The CR coil on the YZ put out a bright blue spark! I then pulled the wire harness off and checked continuity again between all wires and also made sure they didn't have continuity with wires they weren't supposed too, while I was doing this I was bending the harness in all different directions as well. I then checked all plugs and connectors everything is very clean and secure no loose wires or pins. There must be something I am missing. It is driving me crazy. So all in all my CDI is good, stator is good, coil is good, as far as I can tell all of the wiring is good. I however have not unbolted the motor to clean the grounds but the bike is super clean so I don't know if I should do that or not. WHAT AM I MISSING?!?! I'm so lost with this bike and I am usually very mechanically inclined! Anyways thanks for all of the help so far, this has been a great forum. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Everything Dirt Bike
Make / Model Specific
Honda
2003 CR 250 Electrical Issues ( No Spark ) I need some input
Top