Hey this is my first post and I have a problem. My motor is seized from the bottom end and I need a replacement or I need to know what motors will fit. I know the 88 to 92 do but is there any others? Anyone have an extra case they would sell? Thanks in advance
1989 yz 125 questions.
- Thread starter gladeslife
- Start date
Might be cheaper just to rebuild the bottom end. $108
Bearing/seal kit
http://www.ebay.com/itm/Main-Crank-Shaft-Bearings-and-Seals-Kit-Yamaha-YZ125-1986-1987-1988-1989-1990-/251168409285?pt=Motorcycles_Parts_Accessories&fits=Model:YZ125&hash=item3a7acdc6c5&vxp=mtr
Connecting rod kit. You'll have to take the crank and kit to a shop.
http://www.ebay.com/itm/YAMAHA-YZ12...Parts_Accessories&hash=item23180cb8c3&vxp=mtr
-BIG DAN
Bearing/seal kit
http://www.ebay.com/itm/Main-Crank-Shaft-Bearings-and-Seals-Kit-Yamaha-YZ125-1986-1987-1988-1989-1990-/251168409285?pt=Motorcycles_Parts_Accessories&fits=Model:YZ125&hash=item3a7acdc6c5&vxp=mtr
Connecting rod kit. You'll have to take the crank and kit to a shop.
http://www.ebay.com/itm/YAMAHA-YZ12...Parts_Accessories&hash=item23180cb8c3&vxp=mtr
-BIG DAN
How come I would have to take it to a shop?Might be cheaper just to rebuild the bottom end. $108
Bearing/seal kit
http://www.ebay.com/itm/Main-Crank-Shaft-Bearings-and-Seals-Kit-Yamaha-YZ125-1986-1987-1988-1989-1990-/251168409285?pt=Motorcycles_Parts_Accessories&fits=Model:YZ125&hash=item3a7acdc6c5&vxp=mtr
Connecting rod kit. You'll have to take the crank and kit to a shop.
http://www.ebay.com/itm/YAMAHA-YZ12...Parts_Accessories&hash=item23180cb8c3&vxp=mtr
-BIG DAN
To press the old rod/pin/bearing/thrustwashers out of the crank halves, then press the new parts from that rod kit back together using a special jig that maintains crank alignment.
-BIG DAN
Damn. What do you think that would cost me
My shop charged me $40 to rebuild my crank plus parts.
Yeah its around $50 labor and around $150 parts typically...
http://www.wiseco.com/ProductSearch.aspx
http://www.hotrodsproducts.com/ProductInfo.aspx?cat_id=93