Reply to thread

Message

<blockquote data-quote="chopnwood" data-source="post: 58077" data-attributes="member: 31">Ktm Off Road Taillight Kit by Enduro Engineering.&nbsp;[ATTACH]3735[/ATTACH]Started out by pulling off the stock taillight kit. Pulled the seat off. Loosen the side plastic. Drilled holes on both sides of the new tail fin for the turn signals. Took a knife and carved a channel in the plastic for the wires that come out of the turn signals so they would nest without getting pinched. A little lock tight and double stick tape and turn signals are secured to the tail fin.&nbsp; Spent a few minutes getting the wires to lay flat in the channels of the tail fin. Once I got them to all sit flat I put some black tape over them to keep them in position. screwed the tail fin to the fender, tucked the wires nice and tight, then zipped tight the excess together under seat. Put everything back together and took it for a spin.&nbsp; <img src="https://www.dirtbikeaddicts.com/static/images/smilies/ride.gif"&nbsp; class="smilie" loading="lazy" alt=":ride:" title="Ride&nbsp; &nbsp; :ride:" data-shortname=":ride:" /></blockquote>

[QUOTE="chopnwood, post: 58077, member: 31"] Ktm Off Road Taillight Kit by Enduro Engineering. [ATTACH]3735.vB[/ATTACH] Started out by pulling off the stock taillight kit. Pulled the seat off. Loosen the side plastic. Drilled holes on both sides of the new tail fin for the turn signals. Took a knife and carved a channel in the plastic for the wires that come out of the turn signals so they would nest without getting pinched. A little lock tight and double stick tape and turn signals are secured to the tail fin. Spent a few minutes getting the wires to lay flat in the channels of the tail fin. Once I got them to all sit flat I put some black tape over them to keep them in position. screwed the tail fin to the fender, tucked the wires nice and tight, then zipped tight the excess together under seat. Put everything back together and took it for a spin. :ride: [/QUOTE]

Verification