Reply to thread

Message: <blockquote data-quote="ossagp" data-source="post: 194870" data-attributes="member: 1650"><p>that is for the stock mikuni.   first you need to detemine what carburetor  you have,  ie 36,  38.  pj version,  or pwk version.  to tell the difference in the pwk go look at the carb at bikebandit.com for a 2000 honda cr250r. compare it to yours and look up a 95 cr125r at the same place.  pay attention to the slide and see if there is an actual adjusting screw that moves the slide up and down on yours.  the pj version doesnt have such a screw and the side of the slide is rounded and about 3/8" thick.  the pwk has a square edged slide that is less than half that thick.  we can work from there.  drenching it doesnt sound like jetting and we can work on the other ways to test for leaks at the float.</p></blockquote><p></p>