Reply to thread

Message

<blockquote data-quote="PSJBrock" data-source="post: 138906" data-attributes="member: 1050">Take a step back and go look back at your pictures. Then look at the fiche you posted. These guys on here have put many of bottom ends together and they are just trying to help. Everything in the bottom end is suppose to spin freely with ALL the bolts Torqued to the proper settings. You HAVE A PROBLEM, and running it as is is only going to shorten one of your ride days.&nbsp;I can see a problem with the pictures you posted.&nbsp;Look below at the fiche you posted. see part number 92022A see where it goes in relation to the gear?[ATTACH=full]16026[/ATTACH]&nbsp;Now look here at the picture you posted of the gear on the shaft. You have the spacer Part number 92022A on the wrong side of the gear. I would be willing to bet that is your problem. That spacer is holding the gear out to far and it is rubbing the case once you torque the bolts down.&nbsp;[ATTACH=full]16027[/ATTACH]</blockquote>

[QUOTE="PSJBrock, post: 138906, member: 1050"] Take a step back and go look back at your pictures. Then look at the fiche you posted. These guys on here have put many of bottom ends together and they are just trying to help. Everything in the bottom end is suppose to spin freely with ALL the bolts Torqued to the proper settings. You HAVE A PROBLEM, and running it as is is only going to shorten one of your ride days. I can see a problem with the pictures you posted. Look below at the fiche you posted. see part number 92022A see where it goes in relation to the gear? [ATTACH=full]16026[/ATTACH] Now look here at the picture you posted of the gear on the shaft. You have the spacer Part number 92022A on the wrong side of the gear. I would be willing to bet that is your problem. That spacer is holding the gear out to far and it is rubbing the case once you torque the bolts down. [ATTACH=full]16027[/ATTACH] [/QUOTE]

Verification