I have a KLX 125L It started up first kick but when I gave it throttle it would bog down . So I assumed it was something with the carburetor and I opened up the carburetor and the seal holding the upper half to the bowl was torn to shit and I replaced the carburetor because the seal kit was five dollars less than the carburetor and now the bike won’t start unless I have full throttle and even when I have full throttle it still runs Shitty. If I release the throttle it bogs out. I’ve messed with the idle screw and didn’t do anything. before I replaced the carburetor it ran better with the air filter taken out still didn’t run good but it ran a little bit better. this is the first bike I’ve owned and worked. I have no idea what else to try any tips? The spark plug is brand new and this carburetor is brand new