My 03 kx250 rebound adjuster is slaughtered from the previous owner using a screw driver that was too small for the flat head slot in the screw. This is causing the adjuster screw to be very stiff when turning it, it feels like it is binding very badly. The other fork legs adjuster is smooth as butter, I'm not able to bottom out the affected adjuster so I can't tell if they are both at the same setting. Is there anyway I can pull this screw/adjuster fully out to clean the head up? All the diagrams in my manual show it as one piece and a new fork cap runs around $90 from factory Kawasaki. Any ideas?