James
Staff member
Mine are saying file size too large
Should now be able to upload pretty much any photo. Hadn’t updated the settings in a few years, a lot has changed...Yeah, that happens with me on here sometimes.
Mine are saying file size too large
Should now be able to upload pretty much any photo. Hadn’t updated the settings in a few years, a lot has changed...Yeah, that happens with me on here sometimes.
Okay so I put carb back on and now bike won’t crank again but I had a fresh top and bottom end rebuild put in new air filter fluids etc and I’ve kicked numerous times and won’t crack but when I did a top end rebuild on the old crank it started first kick any suggestions ?Yeah, that happens with me on here sometimes.
Will it start if it is towed or bump started?Okay so I put carb back on and now bike won’t crank again but I had a fresh top and bottom end rebuild put in new air filter fluids etc and I’ve kicked numerous times and won’t crack but when I did a top end rebuild on the old crank it started first kick any suggestions ?
No sirWill it start if it is towed or bump started?
Unless I’m doing it wrong I go up hill and then roll down kick it in second and drop my weight downWill it start if it is towed or bump started?
Re check everything, pull the plug to see if it is wet, check for spark at the plug for starters. It sounds like it went from running incorrectly to not at all after simply working on the carb. Probably something simple here.Unless I’m doing it wrong I go up hill and then roll down kick it in second and drop my weight down
Yea the plug was wet I cleaned it and then put back in it had some spark but still wouldn’t kick so is it something inside maybe wrong ?Re check everything, pull the plug to see if it is wet, check for spark at the plug for starters. It sounds like it went from running incorrectly to not at all after simply working on the carb. Probably something simple here.
Okay thanks I will try thatIt ran WOT before you adjusted the slide, now the slide is closing completely and it won't start?
Time to clean the carburetor and set the float.
Start with the mixture screw at 1.5 turns from lightly seated.
Idle screw should just bump the slide up a mm or two.
Choke on, no throttle, it should pop to life.
-BIG DAN