Reply to thread

Message: <blockquote data-quote="HeyWaitUp" data-source="post: 168580" data-attributes="member: 1715">No I didn't get that deep. All I did was change the oil, and I cleaned the clutch housing when I was in there. Once you take the crankcase cover off, your forced to deal with this ball bearing retainer deal with a spring on the outside of the clutch housing. I thought I got it all lined up when I put it back together (because if you're not lined up the crankcase won't fit back on) but maybe it's not perfect? I tried adjusting the clutch via the adjuster on the outside and that helped for one run through the gears and it might be slightly better now but still shifts rough past 1st.Hard to tell if it's messed up or if my fatass shouldn't be riding it! I'm gonna break her down again and see if I can get at the problem after our ride...</blockquote>