125 Carb kx 125 98

[J109]

I cleaned the carb and replaced all lines and the vent line on the choke side is leaking did I do something wrong. Does anyone have a diagram

 

[SRAD97750]

I cleaned the carb and replaced all lines and the vent line on the choke side is leaking did I do something wrong. Does anyone have a diagram

Float adjustment/condition is the likely cause of fuel coming from an overflow drain tube, due to flooding. -BIG DAN

 

[J109]

Float adjustment/condition is the likely cause of fuel coming from an overflow drain due to flooding. -BIG DAN

Well it was it real good condition and clean so how do I adjust the float

 

[2strokesteve89]

Well it was it real good condition and clean so how do I adjust the float

im pretty sure the height spec is 16mm but to adjust the float you need to bend the tang on the back of the float that rests on top of the needle, to raise or lower the float. it is measured as indicated in the picture below. Also when you are in there, manually lower and raise the float while blowing thru the fuel inlet to make sure the needle seals against the seat shutting down flow. If it doesn't you'll need a needle and seat also.

 

[Mihylo33]